Cobra Hood Bow For AC And Shelby Cobra Soft Top Fixing To Cobra Windscreen

Brief fitting instructions to fit the Cobra soft top hood are once the hood frame is positioned drape the hood over the frame and tape loosely into position the rear of the hood to the bodywork then drape the excess material over the windscreen frame pulling lightly to take out the slack (if its a cold environment then a heater in the car or a warm day will make the material more supple) this will show you if the hood is a good fit or not. If you are happy then return the approval hood for the new one. Fit the male studs to the rear body of the Cobra and then attach the female fasteners to the hood to correspond stretch the hood over the hood frame and onto the windscreen the hood bows are slid into the top groove of the screen and are in 2 halves to allow easy fitment and for the hood to stow away when not in use. The hood bows have to be glued to the excess material with a high bond adhesive the material wraps around and inside the hood bows helping to create a barrier 2 x hood bow fasteners hold the hood and bow to the screen side pillars. These instructions are intended as a guide only and your own common sense and capability will ensure a good fit.